I intentionally didn't book any fishing trips last week and knowing that January is traditionally slow for bookings, a had been planning for months to do a complete re-wire of the Anglers Mark. A new switch panel was ordered from New Wire Marine and I have been gathering other supplies - marine wire, terminals, and connectors.
The re-wire was none to soon - the last few trips in December all of my switches began to fail and the GPS/Fishfinder and VHS Radio got to where they would not power up. I began the re-wire on New Years Eve and finished it up Friday afternoon. All of the old wiring was pulled out and new installed; new terminals, ground bus, and fuse block installed.
NEW to the boat - a permanent aerator for the front bait well; the existing rear aerator is now run thru a switch - I don't have to clamp the leads to the battery anymore. There's a new 40 amp breaker between the battery and the new terminals; a new courtesy light up at the bow; and I finally installed a gas vent out the hull of the boat (it's been missing a couple of years). Here's a short video of the final wiring...
